LC Packings Probot 161403, User Manual

Page: 28 / 118

Installation and Getting Started
2-8
D960R3
User’s Manual Probot
TABLE 2-5 The RELAY Cable
Output Pin No. Color Code Description
1 brown Relay 1, normally open
2 red Relay 1, common Relay 4
3 orange Relay 1, normally closed
4 pink Relay 2, normally open
5 yellow Relay 2, common Relay 3
6 green Relay 2, normally closed
8 blue Relay 3, normally open
9 light blue Relay 3, common Relay 2
10 lilac Relay 3, normally closed
11 gray Relay 4, normally open
12 white Relay 4, common Relay 1
13 Black Relay 4, normally closed
2.4.1 G ANALOG IN Connector
This input is reserved for future use.
2.4.1 H VIDEO Connector
If the camera option is installed in your Probot, connect the BNC type connector
of the VIDEO output to the monitor (e.g. P/N 160567) using the connecting
cable provided with the camera.
2.4.1 I POWER Connector
Since the Probot Micro Fraction Collector is fitted with a universal power supply
for input voltages from 90 to 260 V (47 - 62 Hz), manual setting of the supply
voltage is not required. The power cord should be inserted in the black socket on
the left side of the rear panel (FIGURE 1-4).
CAUTION
Caution: Make certain that the system is properly grounded to a true earth
ground. Connecting the instrument to an ungrounded power line can cause
injuries and serious damage to the system.