Larsen & Toubro C*2000 Series, User Manual

Page: 106 / 183

Chapter 8 Application
8-3
Cx2000 AC Drive
8.2 Jog control
 Jog Operation
Group Code Item Set Value Setting Range Initial Unit
Function Group 1
F20 Jog frequency - 0.00~ 400.00 10.00 Hz
I/O Group
I21
Multi-function input terminal
P5 function selection
4 0 ~ 27 4
 Function group 1: set the jog frequency in F20.
 Select a terminal to use for jog operation from multi-function input terminals (P1~P8)

If P5 is set for jog operation, set I21 to 4 (jog)
 Jog frequency can be set within the range of F21 [Max frequency] and F23 [Start frequency].

Jog operation overrides all other operations except Dwell operation. Therefore, if Jog frequency
command is entered in the middle of Multi-Step, Up-Down or 3-wire operation, operation is executed at
Jog frequency.
 JOG FX/RX Operation
Group Code Item Set Value Setting Range Initial Unit
Function Group 1 F20
Jog frequency - 0.00~ 400.00 10.00 Hz
I/O Group
I20
Multi-function input terminal
P4 function selection
26 0 ~ 27 3
I21
Multi-function input terminal
P5 function selection
27 0 ~ 27 4
P 5 (JOG)
운 전 지 령 (FX )
주 파 수
F20
P 1
P 5
C M
F X : I17 = 0
JO G : I21= 4
Run Command
Frequency
P5 (JOG)
전 압
운 전 지 령
F12
P 3
Voltage
P3
Run command