Lanier Copier System Edition, Operating Instructions Manual

Page: 1075 / 1270

Operating Instructions Facsimile Reference (option) <Advanced Features>
147
TSI Print
Usually the sender's Fax Header is printed on re-
ceived messages. If the sender has not pro-
grammed their Fax Header, you will not be able
to identify them. However, if you turn this fea-
ture on, the sender's Own Name or Own Fax
Number is printed instead so you can find out
where the message came from.
⇒
Chapter 3,
“Initial settings and Adjustment” in the Basic
Features manual
Note
❒
You can turn it on or off in the User Parame-
ters.
⇒
p.216 “Changing the User Parame-
ters” (Switch02, Bit3)
CIL/TID Print
The optional ISDN Unit is required.
Two features are provided for identification of
messages received by G4 (ISDN). If turned on,
this information will be printed on every page.
The CIL (Call Identification Line) refers to the
combination of the receiver's Own Fax Number,
name, the sender's Own Fax Number and name,
time, and page number. The TID refers to the
name programmed by the sender in their Fax
Header.
Limitation
❒
These features are available only when re-
ceiving in G4 mode.
❒
If the sender's TID contains double-byte char-
acters (for example Chinese characters), the
TID will not be printed even if TID Print is
turned on.
Note
❒
You can turn CIL and TID on or off in the User
Parameters.
⇒
p.216 “Changing the User Pa-
rameters” (Switch02, Bit5 or Bit6)