Lanier Copier System Edition Operating Instructions Manual Download Page 171

Page: 171 / 1270

Safety Information

When using your equipment, the following safety precautions should always be
followed.

Safety During Operation

In this manual, the following important symbols are used:

WARNING:

Indicates a potentially hazardous situation which, if instructions
are not followed, could result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation which, if instructions are not
followed, may result in minor or moderate injury or damage to property.

•

Confirm that the wall outlet is near the machine and freely accessible,
so that in event of an emergency, it can be unplugged easily.

•

Disconnect the power plug (by pulling the plug, not the cable) if the
power cable or plug becomes frayed or damaged.

•

To avoid hazardous electric shock or laser radiation exposure, do not
remove any covers or screws other than those specified in this man-
ual.

•

Turn off the power and disconnect the power plug (by pulling the
plug, not the cable) if any of the following conditions exist:

•

You spill something into the equipment.

•

You suspect that your equipment needs service or repair.

•

Your equipment's cover has been damaged.

•

Do not incinerate spilled toner or used toner. Toner dust is flammable
and might ignite when exposed to an open flame.

•

Disposal should take place at an authorized dealer or appropriate col-
lection site.

•

If you dispose of the used toner cartridges yourself, dispose of them
according to local regulations.

Summary of Contents for Copier System Edition




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Copier System Edition

Reviews:

Related manuals for Copier System Edition

Brands by name

Popular brands

Lanier Copier System Edition, Operating Instructions Manual

Search results

Summary of Contents for Copier System Edition

Reviews:

Related manuals for Copier System Edition

Brands by name

Popular brands