Lanier Copier System Edition, Operating Instructions Manual

Page: 821 / 1270

Operating Instructions Scanner Reference
105
Memory is full.
Cannot scan. Stored files delivery is only available.
Note
❒
These messages are shown alternately.
There is not enough remaining hard disk capacity. No
more files can be stored. Delete unneeded files.
Memory is full.
Delete the unnecessary stored file.
Note
❒
These messages are shown alternately.
There is not enough remaining hard disk capacity. Delete
unneeded files.
Memory is full.
Press [Transmit] to transmit the scanned data.
To delete the data, press [Cancel].
Because there is not enough hard disk capacity in the ma-
chine, the page could only be partially scanned. Specify
whether to use the data or not.
Memory is full. Scanning has been cancelled.
Do you want to store the scanned data?
Because there is not enough hard disk capacity in the ma-
chine, the page could only be partially scanned. Specify
whether to use the data or not.
Memory is full. Scanning has been cancelled.
Press [Transmit] to transmit the scanned data.
To delete the data, press [Cancel].
Because there is not enough hard disk capacity in the ma-
chine, the page could only be partially scanned. Specify
whether to use the data or not.
No destination is programmed for this number. The short ID number that can be assigned to each desti-
nation is not programmed in the delivery server. Assign a
correct number to each destination.
No HDD is available for this function. Cannot store.
Set original and select the TWAIN settings from the PC.
There is no HDD or the necessary HDD (HDD 40 GB) is
not installed.
Message Causes and Solutions