Lanier Copier System Edition, Operating Instructions Manual

Page: 563 / 1270

Basic Copying
62
1
Duplex
This function can be used in follow-
ing ways:
• 1 Sided
→
2 Sided
• 2 Sided
→
2 Sided
• 2 Sided
→
1 Sided
Duplex
The optional duplex unit and hard disk
unit (40 GB) are required.
❖ ❖ ❖ ❖
1 Sided
→ → → →
2 Sided
This mode makes two-sided copies
from one-sided originals.
Note
❒
If you set an odd number of 1-
Sided originals in the optional
document feeder (ADF), the re-
verse side of the last page is left
blank.
❒
When original images are cop-
ied, the images are shifted by
the width of the binding mar-
gin. You can adjust the binding
margin or binding position. You
can also change their default
v al u e s .
⇒
“ F r o n t M a rg in :
Left/Right”, “Back Margin:
Left/Right”, “Front Margin:
Top/Bottom” and “Back Mar-
gin: Top/Bottom”,
Advanced
Features manual
❒
A binding margin can be auto-
matically made on the back
side.
⇒
“1 sided
→
2 sided Auto
Margin: T to T”, Advanced Fea-
tures manual
❖ ❖ ❖ ❖
2 Sided
→ → → →
2 Sided
This mode makes two-sided copies
from two-sided originals.
Limitation
❒
You cannot use the following
copy paper in this function:
• Paper smaller than A5
K
(possible on A5
K
)
• Paper larger than A3
L
, 11"
×
17"
L
• Paper thicker than 105g/m
2
,
28 lb.
• Paper thinner than 60g/m
2
,
16 lb.
• Translucent paper
• Adhesive labels
• OHP transparencies
• Thick paper
• Postcards
❒
You cannot use the Bypass Tray
with this function.