Lanier Copier System Edition, Operating Instructions Manual

Page: 644 / 1270

Operating Instructions Copy Reference <Advanced Features>
69
Interrupt Copy
Use this function if you wish to interrupt a long
copy job to make urgently needed copies.
Limitation
❒
You cannot use the Interrupt Copy function
when scanning fax and scanner originals.
Note
❒
The procedure for making interrupt copies de-
pends on the operation the machine is cur-
rently carrying out.
To Interrupt an Original Being Fed Using the
Optional Document Feeder (ADF)
AAAA
Press the
{{{{
Interrupt
}}}}
key.
The Interrupt indicator lights up and scan-
ning stops.
BBBB
Remove the originals that were being cop-
ied, and then place the originals you want
to copy.
CCCC
Press the
{{{{
Start
}}}}
key.
The machine starts making your copies.
DDDD
When your copy job is finished, remove
your originals and copies.
EEEE
Press the
{{{{
Interrupt
}}}}
key again.
The Interrupt indicator goes off.
FFFF
When the display prompts you, replace the
originals that were being copied before.
Note
❒
When the “Reset * originals.” message ap-
pears, remove the original after scanning,
and then re-set the original.
GGGG
Press the
{{{{
Start
}}}}
key.
Copying will restart.
Note
❒
The previous copy job settings will be re-
stored and the machine will continue copy-
ing from where it left off.