Lanier Copier System Edition, Operating Instructions Manual

Page: 181 / 1270

Guide to the Machine
6
1
Control Panel
The illustration of the control panel will vary depending on the installed option-
al unit. The following illustration has all the options installed.
1.
{{{{
User Tools/Counter
}}}}
key
• User Tools
Press to change the default settings
and conditions to meet your require-
ments.
⇒
"User Tools (System Set-
tings)" in Administrator Reference 2
Copier System Edition
• Counter
Press to check or print the total num-
ber of pages.
2.
Indicators
Show errors and machine status.
3.
{{{{
Adjust/Program Color
}}}}
key
Use this key to register or adjust a color.
⇒
Copy Reference <Basic Features>
4.
Display panel
Shows operation status, error messages,
and function menus.
5.
{{{{
Check Modes
}}}}
key
Press to check the entered settings.
6.
{{{{
Program
}}}}
key
Press to select the program mode.
⇒
Copy Reference <Advanced Features>
⇒
Facsimile Reference <Advanced Fea-
tures>
7.
{{{{
Clear Modes
}}}}
key
Press to clear the previously entered set-
tings.
8.
{{{{
Energy Saver
}}}}
key
Press to switch to and from Energy Saver
mode.
9.
{{{{
Interrupt
}}}}
key
Press to interrupt a long job to make cop-
ies.
10.
Main power indicator and On
indicator
The main power indicator goes on when
you turn on the main power switch.
The On indicator blinks when the power
is on.
Important
❒
Do not turn off the power while
the On indicator is blinking. Doing
so may damage the hard disk.
ZFNS010N