Lanier Copier System Edition, Operating Instructions Manual

Page: 410 / 1270

Operating Instructions Administrator Reference 2
181
SmartNetMonitor for Admin
AAAA
Run SmartNetMonitor for Admin.
BBBB
Click the
[ Group ]
menu, point to
[ Open LAN ]
, and select
[ TCP/IP ]
or
[ IPX/SPX ]
. A list of printers
appears.
Note
❒
Select the protocol of the printer you want to change the settings.
CCCC
On the list, click to select the printer whose network interface board you want to change the
settings.
DDDD
From the
[ Tools ]
menu, select
[ NIB Setup Tool ]
.
The NIB Setup Tool starts up.
EEEE
Select
[ Property Sheet ]
, and then click
[ OK ]
.
TCP/IP
A
Click the [ General ] tab, and then type the name into the [ Device Name ] box and comment
into the [ Comment ] box.
• In the
[ Device Name ]
box, type the name of the printer within 47 characters. The factory de-
fault name consists of "RNP" and the last 3 bytes of the MAC address of the network interface
board. For example, when the MAC address is 00:00:74:62:7D:D5, the factory default name
is "RNP627DD5". No name of 9 characters is permitted if prefixed with "RNP". Also, when
DHCP is selected as an IP address setting, the number of characters is limited to within 13
characters.
• In the
[ Comment ]
box, type any comment on printers within 31 characters.