Lanier Copier System Edition, Operating Instructions Manual

Page: 447 / 1270

Operating Instructions Administrator Reference 2
218
Full: Waste Toner The waste toner is full Replace a new waste toner.
Hex Dump Mode The printer is in Hex Dump Mode. Wait for a while. If the "Hex Dump
Mode" message does not change, on
the panel display press
{{{{
On Line
}}}}
to
return to the "Ready " condition.
Low: Black Toner The toner cartridge is not set correct-
ly or toner is almost running out. Set the toner cartridge correctly.
Low: Cyan Toner The toner cartridge is not set correct-
ly or toner is almost running out. Set the toner cartridge correctly.
Low: Magenta Toner The toner cartridge is not set correct-
ly or toner is almost running out. Set the toner cartridge correctly.
Low: Yellow Toner The toner cartridge is not set correct-
ly or toner is almost running out. Set the toner cartridge correctly.
Low: Staples The staple is not set correctly or sta-
ple is almost running out. Set the staple cartridge correctly.
Malfunction: Duplex Unit An error has occurred in the optional
Duplex Unit. First, turn the power switch off and
then on. If the message appears again,
call your sales or service representa-
tive.
Malfunction: Finisher An error has occurred in the optional
Finisher. First, turn the power switch off and
then on. If the message appears again,
call your sales or service representa-
tive.
Messages Description Comments