Lanier Copier System Edition, Operating Instructions Manual

Page: 201 / 1270

Getting Started
26
2
Acquiring the IP Address from the DHCP Server
To use the DHCP server to acquire the IP address, select
[ DHCP ]
from
[ Network
Boot ] .
Note
❒
You need to set the server when you use DHCP. See " Appendix " in Admin-
istrator Reference 2 Copier System Edition.
❒
To always assign the same IP address to the machine, reserve the IP ad-
dress for the machine on the DHCP server. See "
Appendix " in Administra-
tor Reference 2 Copier System Edition.
❒
Use the default IP address.
A
Make sure that [ Network ] is selected, and then press [ Network Boot ] .
B
Press [ DHCP ] , and then press [ OK ] .
When using NetWare
To use the machine on NetWare, be sure to select the type of
[ NW Frame Type ]
.
You can select the following frame types:
• Auto select (Default)
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
Note
❒
Select the same frame type which the file server uses.
❒
To use the machine in a Pure IP environment on NetWare 5/5.1, select [ Ef-
fective ]
for the TCP/IP protocol in step
E
.