Lanier Copier System Edition, Operating Instructions Manual

Page: 536 / 1270

Copying from the Bypass Tray
35
1
CCCC
Press the
{{{{
#
}}}}
key.
DDDD
Press [ Custom Size ] .
EEEE
Enter the vertical size of the paper
with the number keys, and then
press
[ # ] .
Note
❒
The size that you can enter is be-
tween 90 (3.5”) to 305mm (12”).
❒
To change the number entered,
press
[ Clear ] or the
{{{{
Clear/Stop
}}}}
key and enter the new number.
FFFF
Enter the horizontal size of the
paper with the number keys, and
then press
[ # ] .
Note
❒
The size that you can enter is be-
tween 148 (5.8”) to 458mm (18”).
❒
If [ Horiz. mm ] is not highlighted,
press
[ Horiz. mm ]
.
❒
To change the number entered,
press
[ Clear ]
or the
{{{{
Clear/Stop
}}}}
key, and then enter the new
number.
❒
When entering a size over
305mm (12”), the image will be
moved to the center of paper
and copied.
GGGG
To register the custom size en-
tered, press
[ Program ] and then
press [ Exit ] .
Note
❒
If you do not register the cus-
tom size, go to step
H
.
❒
Only one custom size can be
stored.
❒
To recall the custom size stored,
press
[ Recall ] .
❒
If you do not register the cus-
tom size, the size you set is de-
leted when modes are cleared.
HHHH
Press [ OK ] .
IIII
Place your originals, and then
press the
{{{{
Start
}}}}
key.