Lanier Copier System Edition, Operating Instructions Manual

Page: 19 / 1270

Replacing Consumables and Maintenance Kit
8
1
GGGG
Holding the green handle, pull
up the Fusing Unit slowly in the
direction of the arrow.
Important
❒
Do not touch any areas other
than the handle.
HHHH
Put the removed Fusing Unit in a
stable and level place.
IIII
Lift the Fusing Oil Unit in the di-
rection of the arrow to remove it,
and put it in a stable and level
place.
Important
❒
Do not touch the inside of the
Fusing Unit.
❒
Be careful not to touch the area
other than that shown in the il-
lustration.
JJJJ
Take out the new Fusing Oil Unit
from the bag, remove seal (
A A A A
),
and then remove seal (
B
B B
B
) as
shown in the illustration.
Note
❒
Be sure to remove seal (
A
), and
then pull it out in a level man-
ner.
Important
❒
Be sure to remove the seals to
avoid printer malfunction.
❒
Be sure to remove seal (
A
) first,
and then remove seal (
B
) to
avoid an oil leak.
❒
Be sure to put the Fusing Oil
Unit in a stable and level place
to avoid an oil leak.
❒
There is oil on the removed
seals and fuser oil roller. Be
careful not to let them come in
contact with your clothes.
ZDJH208J
ZDJH052E
ZDJH053J