![background image](http://html2.mh-extra.com/html/landoll/bendi-b40i4/bendi-b40i4_maintenance-manual_3515299089.webp)
TROUBLESHOOTING AND CORRECTIVE MAINTENANCE
3-41
NOTE
DO NOT file or emery the mating surface. The finish must
be maintained.
6.
Wipe the mating face with a lint free moist cloth,
rubbing the valve cover from inside to outside. See
Figure 3-41.
7.
Degrease the mating face using isopropyl alcohol.
NOTE
8.
After degreasing, do not touch the mating surfaces
with hands or fingers.
9.
Using a clean brush apply a film of Loctite 7471
activator on the valve cover surface which should be
in contact with the brake housing. Wait 2 minutes.
See Figure 3-42.
IMPORTANT
DO NOT apply any activator on the shaft.
10. Install the new O-ring, item 045, and if the motor is
dual displacement, install the new O-ring, item 057.
See Figure 3-43.
Figure 3-41: Wipe Brake Housing with Moist Cloth,
Inside to Outside
Figure 3-42: Brush Loctite on Valve Cover Surface
Figure 3-43: Install New O-Ring
NOTE
DO NOT touch the mating surface after coating it with the
activator.
11. Place a continuous bead of Loctite 638 glue on the
brake housing, following the median line of the
mounting bolt hole centers. See Figures 3-44 and
3-45.
12. Make sure the bead of glue is continuous, with no
gaps.
NOTE
NEVER apply the activator on the same surface as the
bead of glue.
Summary of Contents for Bendi B40i4
