![background image](http://html2.mh-extra.com/html/landoll/bendi-b40i4/bendi-b40i4_maintenance-manual_3515299016.webp)
1-10
F-581-R1
INTRODUCTION, SAFETY AND INSPECTION
To be performed after 1st 300 hrs of truck operation in addition to the required pre-shift daily inspection.
Technicians 1st 300 Hour Inspection
Status
Landoll / Bendi IC
SAFETY & OPERATIONAL CHECKS
Have a qualified technician correct all problems.
OK - Yes,No
Maintenance Note if Applicable
Mast - Inspect all friction surfaces.
Check lift chain tension, inspect, clean and lubricate.
Lift and Tilt cylinder - Check to be sure they work
together and in unison.
Power Steering - Check operation, inspect and fill.
Parking Brakes - Check for effectivity.
Engine Oil and Filter - Change.
LPG Filter - Change.
Hydraulic Oil Pump - Check Operation.
Drive wheels, Re-Torque lug nuts to (225 ft-lbs(300
Nm).
Vacuum Hoses - Check for cracks and leaks.
Switches (interlock, direction, parking/seat, key,
pressure/temperature) - Check operation.
Wires, Connections, Bolts and Nuts - Check.
Date
Inspector:
Truck No.
Model No.
Location
Serial No.
Shift
Hr Meter
Battery Fluid
Hydraulic Oil
Summary of Contents for Bendi B40i4
