4-10
F-581-R1
CALIBRATION AND PROGRAMMING
12.
0,3-RampDownNFWD
- Sets the decel rate when
selecting neutral. The lower the value the more
aggressive.
13.
0,3-RampDownDRev
– Sets the decel rate when
changing direction. “Reverse to forward”. The lower
the value the more aggressive.
14.
0,3-RampDownCRev
- Sets the decel rate when
letting up on the drive pedal. The lower the value the
more aggressive.
15.
0,3-RampDownBRev
- Sets the decel rate when
applying the brake. The lower the value the more
aggressive.
16.
0,3-RampDownNRev
- Sets the decel rate when
selecting neutral. The lower the value the more
aggressive.
17.
0,3-RampUpFwd
– Sets the accel rate in the forward
direction.
18.
0,3-RampUpRev
– Sets the accel rate in the reverse
direction.
19.
0,3-PropelProfileRampUp
– Sets the period for the
six point profile to execute, sets timing for smooth
operation
20.
0,3-PropelProfileRampDown
- Sets the period for
the six point profile to execute, sets timing for smooth
operation.
21.
0,3-Pedal_Profile_X
1 – Pre defined in software, for
reference only.
22.
0,3-Pedal_Profile_X2
– Pre defined in software, for
reference only.
23.
0,3-Pedal_Profile_X3
– Pre defined in software, for
reference only.
24.
0,3-Pedal_Profile_X4
– Pre defined in software, for
reference only.
25.
0,3-Pedal_Profile_X5
– Pre defined in software, for
reference only.
26.
0,3-Pedal_Profile_X6
– Pre defined in software, for
reference only.
27.
0,3-Pedal_Profile_Y1
– Pre defined in software, for
reference only.
28.
0,3-Pedal_Profile_Y2
– Value sets the scaling of
pedal input at 20%.
29.
0,3-Pedal_Profile_Y3
– Value sets the scaling of
pedal input at 40%.
30.
0,3-Pedal_Profile_Y4
– Value sets the scaling of
pedal input at 60%.
31.
0,3-Pedal_Profile_Y5
– Value sets the scaling of
pedal input at 80%.
32.
0,3-Pedal_Profile_Y6
– Value sets the scaling of
pedal input at 100%.
33.
0,3-Max_Pump
– Pre defined in software, for
reference only.
34.
0,3-Min_Pump
– Pre defined in software, for
reference only.
Figure 4-13: Engine Screen
Engine Screen (Parameters)
The “ENGINE” screen shot provides featured parameters
for the Plus 1 functions. See Figure 4-13.
Below is provided a definitions list for forklift
parameters: See Figure 4-13.
1.
0,3-Propel_RPM_Pump_Y1
- Pre defined in
software, for reference only
2.
0,3-Propel_RPM_Pump_Y2
- Pre defined in
software, for reference only
3.
0,3-Propel_RPM_Pump_Y3
- Pre defined in
software, for reference only
4.
0,3-Propel_RPM_Pump_Y4
- Pre defined in
software, for reference only
5.
0,3-Propel_RPM_Pump_Y5
- Pre defined in
software, for reference only
6.
0,3-Propel_RPM_Pump_Y6
- Pre defined in
software, for reference only
7.
0,3-Max_Pump
- Predefined in software, for
reference only
8.
0,3-Min_Pump
- Pre defined in software, for
reference only
9.
0,3-MinEngRPM
- Pre defined in software, for
reference only
Summary of Contents for Bendi B40i4
