![background image](http://html2.mh-extra.com/html/landoll/bendi-b40i4/bendi-b40i4_maintenance-manual_3515299137.webp)
ENGINE WITH FUEL SYSTEM
5-17
The provided S3000, SAX500 tabs, along with the VSM
and TCM tabs are provided to display all function settings
within the software. The settings shown are for reference
only, you will not need to alter or manipulate any options
within those tabs.
Diagnostics Function Tab
Within this function “Active” or “Historic” engine faults will
be recorded with SPN fault codes and descriptions. See
Figure 5-16 on page 5-17. Both faults can be cleared
although if corrections have not been made “Active” faults
will return. All faults may be saved to a Tab Limited Excel
file for future use. Faults can also be cleared here.
Figure 5-16: Diagnostics Tab
TSC1 Function Tab
The “TSCI Tab” (Testing System Components) allows you
to operate the engine from your computer. See
Figure 5-17. You are able to change RPM and torque of
the engine as you monitor the performance.
Changing the controls you will notice the engine
operations changing. Changes made in this screen
overrides any actual pedal movement until computer is
unplugged or control is switched to off.
NOTE
Priority Setting must be set on “0: Highest”.
Figure 5-17: Plot Type Odometer/Torque
Summary of Contents for Bendi B40i4
