Tenera Installation Instructions 35
Mount the Installation Brackets — End Mount
End mount the headrail when conventional mounting techniques will not work — for example, in
an arched window opening.
■
Mount the extension brackets on a surface at least
1
1
/
4
" wide.
➤
Add
1
/
4
" to the minimum depth if using the optional
back cover.
■
Attach the installation brackets to the extension brackets
using the provided screws and speed nuts.
WARNING:
To end mount shadings into a surface other than a secure wall stud, use
medium to heavy-duty wall anchors (not provided) matched to the wall thickness. Failure to
mount the brackets securely may result in injury or property damage.
Proceed to “Attach the Back Cover (Optional for Inside or End Mounts)” below,
or proceed to “Install the Shading”
Attach the Back Cover (Optional for Inside or End Mounts)
■
If using the back cover, use heavy-duty scissors to cut off
the top tabs on the back cover brackets and both tabs on
the installation brackets.
■
Snap the prongs on the back cover brackets into the holes
on the back of the installation brackets.
■
After bracket installation, install the cover into the back
cover brackets, as shown. If necessary, trim the back cover
with scissors to the desired width.
Proceed to “Install the Shading”
Extension
Bracket
1
1
/
4
"
Minimum
Depth
Installation
Bracket
Remove
Top Tab
Back
Cover
Bracket
Back
Cover
