Tenera Installation Instructions 34
■
Center each installation bracket on your marks and mark the location of the screw holes.
CAUTION:
The rear of the spacer blocks/brackets must be flush against a flat mounting
surface. Do not mount brackets on curved molding.
➤
A minimum 1
1
/
8
" flat vertical height is required to mount the installation brackets.
➤
The top of the installation brackets should be at the desired height. The brackets should
be level and aligned.
■
Use a
3
/
32
" drill bit to drill holes for the mounting screws.
IMPORTANT:
Use drywall anchors when mounting into drywall.
■
Attach the installation brackets using the screws provided.
IMPORTANT:
The front edges of the installation
brackets must be level and aligned to each other.
Additional Clearance
■
If using
1
/
4
" or
1
/
2
" spacer blocks, attach
the spacer block(s) and installation bracket to
a flat vertical mounting surface with #6 screws
long enough for a secure installation.
IMPORTANT:
The maximum spacer block
allowance is 1
1
/
2
".
■
Attach the extension bracket to a flat vertical
mounting surface.
➤
Attach an installation bracket to the underside of
each extension bracket using the provided screws
and speed nuts.
Proceed to “Install the Shading”
Spacer
Blocks
1
1
/
2
"
Maximum
Speed Nuts
Extension
Bracket
