Tenera Installation Instructions 70
Attach the Dust Cover (Optional for Outside Mounts)
The dust cover is used to protect the top of the headrail from exposure to dust on outside
mounted shadings.
■
Cut the dust cover to desired width.
■
Remove the paper backing on
one side
of the hook and loop
fastener dots.
■
Apply the dots to the installation brackets on each end of the shading.
■
Remove the remaining paper backing from the dots.
■
Center the dust cover over the top of the shading, above the previously placed dots.
■
Press the dust cover down onto the dots.
Remove
Paper
Backing
Overhead View
No Dust Cover
Dots
Dust Cover Installed
