Tenera Installation Instructions 15
Plug the Power Cable into the Battery Wand
■
From the back of the shading headrail, connect the
power cable (from the motor side) into the socket
on the battery wand.
Install the Back Cover (Optional)
■
If using a back cover, install it into the back cover brackets,
as shown.
Proceed to “Attach Magnetic Hold-Down Brackets (Optional)” or
If You Have a Satellite Battery Pack...
Mount the Satellite Battery Pack
■
Decide where you want to mount the bracket. A satellite
battery pack may be mounted in any orientation.
■
Mark the screw holes.
■
Drill the screw holes using a
3
/
32
" drill bit.
■
Remove the backing from the double-sided tape. Press the bracket into place.
■
Attach the bracket using the screws provided.
■
Position the battery wand so the power cable is easily connected to the socket.
■
Snap the battery wand into the bracket.
■
Replace the cover with the slot aligned
to the socket in the battery wand.
Power
Cable
Battery
Wand
Back
Cover
Back
Cover
Satellite Battery Pack
or DC Power Supply
Battery Wand
Wall Mount Bracket
Socket
Battery Wand Cover
Socket
Slot
