Lafayette Tenera Auto-Lift, Installation Instructions Manual, Page: 7 / 76

Tenera Installation Instructions 7 BACK
Mount the Installation Brackets — Inside Mount
■
Measure and mark end bracket locations 2" in from each jamb.
➤
If more than two installation brackets are required (see table on page 3), mark the
location of additional bracket(s) spaced evenly between the two end bracket locations.
Mount into wood whenever possible.
Allow a minimum of 18" from the motor side
for the battery wand.
■
Determine whether or not to remove any tabs from the installation brackets.
➤
If using a back cover , use pliers to remove both tabs from the installation brackets.
➤
If using a battery wand without a back cover, leave both tabs
on the brackets. The top tab ensures that there is clearance
for the wand.
➤
If using a satellite battery pack or DC power supply without a
back cover, use pliers to remove the
top
tab.
➤
Save any removed top tabs for use as shims when needed.
Shadings with Battery Wand
Motor
Side
Jamb Jamb
Top limits should be equal
distance from the ends of headrail.
18" Minimum for Battery Wand
Shadings with Optional Satellite Battery Pack or DC Power Supply
Motor
Side
Jamb
Jamb
2"
Space Evenly Space Evenly
2"
2"
Space Evenly Space Evenly
2"
Top View
Installation Bracket
Removable Tabs