Tenera Installation Instructions 71
Operate the Shading
To Lower the Shading and Open the Vanes
■
Using long, even strokes, pull the cord down toward
the center of the shading.
■
Continue pulling down until the shading is fully
lowered and the vanes are open.
■
The shading can be stopped at any point
while lowering.
To Close the Vanes and Raise the Shading
■
Using long, even strokes, pull the
cord straight down or slightly out and
down.
■
First the vanes will close and then the
shading will raise.
■
The shading can be stopped at any
point while raising.
To Lower and Tilt Vanes Open
Non-Operable Zone
Pull cord toward center and down.
Or
Non-Operable Zone
To Tilt Vanes Closed and Raise
Pull cord straight down or slightly out and down.
