Tenera Installation Instructions 42
Removing the Shading
■
Move each lever of the installation brackets to the left to release the
shading.
CAUTION:
A flat blade screwdriver can be used to move the lever.
Be very careful not to tear or damage any of the fabric.
➤
If the lever is inaccessible
or inoperable, lower the
shading until you can see
the underside of the bracket.
Carefully reach a small flat
blade screwdriver behind
the shading to the tab
on bottom of the bracket
between the screw holes.
➤
Push the tab away from
the shading and pull the
headrail to release it from
the bracket.
■
Carefully pull the shading to
remove it from the brackets.
Cleaning Procedures
Sheer shadings are made of 100% polyester, which means they are inherently durable and
resilient. However, care must be taken to avoid wrinkling the fabric, particularly where the vanes
meet the facings.
Dusting
Regular light dusting with a feather duster is all the cleaning that is needed in most
circumstances.
Vacuuming
Use a low suction, hand-held vacuum for more thorough dust removal.
Forced Air
Blow away dirt and debris between the vanes using clean compressed air.
Spot-Cleaning
Do not spot-clean window shadings.
Move the lever to the left
to release the shading.
Top View
Tab
Installation Bracket
End Cap
Underside of
Bracket