Tenera Installation Instructions 54
Attach Fabric Support Clips
CAUTION:
Handle the fabric carefully throughout the installation process. Clear a clean,
flat workspace.
■
Place the shading with the front side of the fabric facing up.
■
Unroll the supplied drill template and place it along the top edge of the shading.
IMPORTANT:
The drill template locates the fabric support clips properly, depending upon
vane spacing. Do not place or slide the clips over the end of a fabric vane.
■
Lift the top edges of the front and back fabric panels.
■
Snap the fabric support clips onto the plastic polystrips attached to the panels.
■
Align the fabric support clips with the drill marks on the template. The clip positions can be
adjusted by sliding them along the polystrip as needed when you install the shading.
Make sure the clips are straight.
Polystrip
Drill Template
Angle Shading Illustrated
