Tenera Installation Instructions 19
Operate the Shading
Test the Shading Using the Manual Control Button
Testing the shading with the manual control button will
allow you to ensure that the motor and power source are
working correctly.
■
Press the manual control button on the bottom of the
motor side end cap to test operation. If the shading
does not operate, see “Resetting the Shading” or
refer to “Troubleshooting”
➤
Press the button to alternately lower, stop, and
raise the shading.
CAUTION:
When raising the shading for the first time, observe how the fabric rolls up into
the headrail. It should roll up evenly. If the bottom rail is not level or the shading starts to
rub against either window jamb, immediately press the manual control button to stop the
shading. See “Adjust the Bottom Rail Weight”
Further Operation and Programming Information
Remote Operation
For information regarding operation and programming of
the remote control, refer to your
Remote Control Guide.
Remote Control
Guide
Battery-Powered
Cellular Shades and
Sheer Shadings
