Tenera Installation Instructions 37
Attach the Magnetic Hold-Down Brackets (Optional)
■
Lower the shading keeping the vanes closed.
■
Place the magnetic hold-down bracket onto the bottom rail just inside
the end cap, oriented as shown.
■
Hold the bracket while opening and closing the vanes (it may be
necessary to have someone else assist you). Adjust the bracket to the
best overall position.
■
Mark the screw location using the mounting options shown below.
➤
The screw should be placed in the middle of the channel. This will allow for
adjustment.
■
Drill the screw holes using a
3
/
32
" drill bit.
IMPORTANT:
Use drywall anchors when mounting into drywall.
■
Attach the hold-down brackets to the mounting surface using
the screws provided.
■
Adjust the bracket location using the channel for best operation,
if necessary.
Hold-Down
Bracket
Bottom
Rail
Outside Mount
Preferred
Alternate
Inside Mount
Preferred
Alternate
Adjust the
bracket
using the
channel.
