Tenera Installation Instructions 32
Mount the Installation Brackets — Inside Mount
■
Mark 2" to 3" from each jamb for bracket location.
➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood
whenever possible.
➤
Use pliers to break off the top tab of each installation bracket.
Save this tab once removed. It may be used as a shim, as described
later in these instructions. Remove the bottom tab on each installation
bracket only if it interferes with the bracket installation.
■
Two-On-One Headrail Shadings.
Two additional installation brackets should be placed on
each side of the panel split.
■
Decide whether the front or back set of holes works best in your application. Mark the
location of the screw holes.
➤
Refer to the chart above for depth requirements.
Top limits should be equal
distance from the ends of headrail.
Space Evenly
Space Evenly
2" – 3"
2" – 3"
Jamb
Jamb
Top
Tab
Lever
Bottom
Tab
Space Evenly
2" – 3"
2" – 3"
Jamb
Jamb
Top Limits
Space Evenly
Panel Split
Space Evenly
2" – 3"
2" – 3"
Minimum
Depth
See Chart
2" – 3"
Depth Chart for Bracket
Placement
Minimum
Fully Recessed
1"
3
1
/
4
"
Note:
Add
1
/
4
" to the minimum depth
dimensions if the optional back cover is
used for inside mounts.
