Lafayette Tenera Auto-Lift, Installation Instructions Manual

Page: 16 / 76

Tenera Installation Instructions 16
BACK
■
Plug the power cable from the shading into
the extension cable.
■
Plug the other end of the extension cable
into the socket in the battery wand.
Install the Back Cover (Optional)
■
If using a back cover, install it into the back cover brackets,
as shown.
Proceed to “Attach Magnetic Hold-Down Brackets (Optional)” or
“Operate the Shading”
If You Have a DC Power Supply...
Connect the Power Supply
■
Plug the power cable from the shading into the extension cable.
■
Plug the other end of the extension cable into the DC power
supply.
■
Plug the DC power supply into a standard outlet.
■
Secure the power supply cable using wire retainers (not
supplied). If hiding the cable behind the shading, make sure
it does not impede the operation of the shading.
■
Space the wire retainers approximately 15" apart along the
power supply cable, as shown.
WARNING:
Keep cords and small parts out of the
reach of children. They can wrap cords around their
necks and
STRANGLE.
They can also put small
parts in their mouths and CHOKE .
WARNING:
Electric shock and/or a fire hazard may
occur, if not properly installed.
Install the Back Cover (Optional)
■
If using a back cover, install it into the back cover brackets,
as shown.
Proceed to “Attach Magnetic Hold-Down Brackets (Optional)” or
“Operate the Shading”
Battery Wand Cover
Extension
Cable
Power Cable
from Shading
Back
Cover
Back
Cover
Satellite Battery Pack
or DC Power Supply
Battery Wand
Power Cable
from Shading
Extension
Cable
DC Power
Supply
Plug
15" (Max)
Power
Supply
Wire Retainer
Back
Cover
Back
Cover
Satellite Battery Pack
or DC Power Supply
Battery Wand