Tenera Installation Instructions 69
Install the Shading
■
Position the shading so that the
front faces you.
■
Slide the headrail into the
installation brackets so the edge
of the headrail is between the
lever and the bracket, as shown.
■
Firmly push the headrail into each bracket until it
clicks and the lever snaps to the right side of the bracket.
IMPORTANT:
Carefully pull on the headrail at each bracket to ensure it is installed securely.
Tassel Adjustment
Adjusting the tassel to eye level will decrease the amount of pulls needed to raise and lower
the shading. This will also enhance child safety.
To Shorten the Tassel Cord
The tassel cord length is usually two-thirds the length of the fully closed
shading.
■
Slide the tassel up the cord revealing the knot.
■
Make a new knot below the tassel at the desired location.
■
Trim the excess cord below the knot.
■
Slide the tassel back down over the knot.
Headrail
Installation
Bracket
Lever
Slide the Headrail
between the Lever
and the Bracket.
Headrail
de the Headrail
ween the Lever
nd the Bracket.
Tassel
