Tenera Installation Instructions 18
Attach Magnetic Hold-Down Brackets (Optional)
■
Lower the shading, keeping the vanes closed.
■
Place the magnetic hold-down brackets onto the bottom rail just inside
the end caps, oriented as shown.
■
Hold the brackets while opening and closing the vanes. (It may be
necessary to have someone assist you.) Adjust the brackets to the best
overall position.
■
Mark the screw locations using one of the mounting options shown
below.
➤
The screw should be placed in the middle of the channel. This will allow for adjustment.
■
Drill the screw holes using a
3
/
32
" drill bit.
■
Attach the hold-down brackets to the mounting surface using
the screws provided.
■
If necessary, adjust the bracket position using the channel for
best operation.
Hold-Down
Bracket
Bottom
Rail
Outside Mount
Preferred
Alternate
Inside Mount
Preferred
Alternate
Adjust the
bracket
using the
channel.
