Tenera Installation Instructions 58
Problem
The angle shading is not centered in the window.
Solution
Add clearance on one side.
Trim the stop strips:
■
Remove the stop strips on the side to add clearance.
■
Trim the stop strips slightly and re-affix. See
“Adjust the Angle Shading”
■
Slide the end fabric support clip until it rests against the stop strip.
■
Adjust the fabric support clips by sliding them slightly toward the adjusted
side.
On the opposite side:
■
Remove the stop strips.
■
Tension the fabric.
■
Re-affix the stop strips. See
“Adjust the Angle Shading”
■
Slide the end fabric support clip until it rests against the stop strip.
