Kyocera ECOSYS FS-C8500DN, Operation Manual

Page: 47 / 240

Handling Paper 3-7
Whiteness : The contrast of the printed page depends on the whiteness
of the paper. Whiter paper provides a sharper, brighter appearance.
Quality control : Uneven sheet size, corners that are not square, ragged
edges, welded (uncut) sheets, and crushed edges and corners can cause
the machine to malfunction in various ways. A quality paper supplier
should take considerable care to ensure that these problems do not
occur.
Packaging : Paper should be packed in a sturdy carton to protect it from
damage during transport. Quality paper obtained from a reputable
supplier is usually correctly packaged.
Special Paper
The following types of special paper can be used:
Use paper that is sold specifically for use with copiers or printers (heat-
fusing type). When using transparencies, labels, thin paper, envelopes,
postcards, or thick paper, feed the paper from the
MP tray . For details,
refer to Paper Settings on page 4-46 .
Since the composition and quality of special paper vary considerably,
special paper is more likely than white bond paper to give trouble during
Note You might see the printer emitting steam in the area around
the top tray if you use damp paper, but it is safe to continue
printing.
Paper Type to be Used Paper Type to be Selected
Overhead projector transparencies
TRANSPARENCY
Rough paper
ROUGH
Thin paper (60 to 64 g/m²)
VELLUM
Label
LABELS
Recycled paper
RECYCLED
Preprinted paper
PREPRINTED
Bond paper
BOND
Postcards
CARDSTOCK
Colored paper
COLOR
Prepunched paper
PREPUNCHED
Letterhead
LETTERHEAD
Envelopes
ENVELOPE
Coated paper
COATED
Thick paper (120 to 220 g/m²)
THICK
High-quality paper
HIGH QUALITY
Custom
CUSTOM 1~8