Kyocera ECOSYS FS-C8500DN, Operation Manual

Page: 132 / 240

4-76 Using the Operation Panel
Ready (Preparation completed tone setting)
When
On
is selected in this setting, a tone sounds when print preparation
has been completed. The default setting is
Off
.
1
In the Buzzer menu screen, press
U
or
V
to select
Ready
.
2
Press [OK] . The
Ready
screen appears.
3
Press U or V to select whether the preparation completed tone is
enabled.
4
Press [OK] . The preparation completed tone setting is set and the
Buzzer menu reappears.
Error (Error tone setting)
When
On
is selected in this setting, a tone sounds when a problem such
as running out of paper or a paper jam occurs during printing. The default
setting is
On
.
1
In the Buzzer menu screen, press U or V to select
Error
.
2
Press [OK] . The
Error
screen appears.
3
Press U or V to select whether the warning tone is enabled.
4
Press [OK] . The warning tone setting is set and the Buzzer menu
reappears.
Display Bright. (Display brightness setting)
Sets the brightness of the message display.
1
In the Device Common menu, press
U
or
V
to select
Display
Bright.
.
2
Press [OK] . The
Display Bright.
screen appears showing the
available brightness settings.
The list shows the following brightness settings:
Darker -2
Darker -1
Normal 0
L1
L2
3
Press U or V to select the desired brightness.
Ready: a b
1
*Off
2
On
Error: a b
1 Off
2 *On
Display Bright.: a b
1
Darker -2
2
Darker -1
3
*Normal 0