Kyocera ECOSYS FS-C8500DN Operation Manual Download Page 39

Page: 39 / 240

Printing Operation

2-13

Appearance Tab

The Appearance tab is contains the following items.

Enlarge window

Doubles the size of the Status Monitor window.

Always on top

Positions the Status Monitor in front of other active windows.

Transparency

Displays the Status Monitor as a transparent window.

Uninstalling Software (Windows PC)

The software can be uninstalled (removed) using the CD-ROM (Product
Library) supplied with the printer.

IMPORTANT

On Macintosh computers, because the printer settings

are specified using a PPD (PostScript Printer Description) file, the
software cannot be uninstalled using the CD-ROM (Product Library).

Exit all active software applications.

Insert the enclosed CD-ROM (Product Library) into the CD-ROM
drive.

Following the procedure used to install the printer driver, click

Remove Software

. The Software Remove wizard appears.

Select the software package to remove.

Click

Uninstall

The uninstaller starts.

When Uninstall complete screen appears, click

Next

Select whether you restart your computer or not, click

Finish

Note

In Windows 7, Windows Server 2008 and

Windows

Vista, the

Remove Driver and Package

screen appears.

Select

Remove driver and driver package

, and click

When KM-NET VIEWER or KM-NET for Direct Printing is
installed, separate uninstallers are launched for each
application. Proceed with the uninstallation steps for each
application as directed by the on-screen instructions.

Note

The software can be uninstalled from the Program

menu.
(In the case of Windows XP)
Start the uninstaller by clicking

start

All Programs

Kyocera

Uninstaller

, and uninstall the software.

Summary of Contents for ECOSYS FS-C8500DN

















































































































































































































































Search results

Summary of Contents for ECOSYS FS-C8500DN

Reviews:

Related manuals for ECOSYS FS-C8500DN

Brands by name

Popular brands

Kyocera ECOSYS FS-C8500DN, Operation Manual

Search results

Summary of Contents for ECOSYS FS-C8500DN

Reviews:

Related manuals for ECOSYS FS-C8500DN

Brands by name

Popular brands