Kyocera ECOSYS FS-C8500DN, Operation Manual

Page: 161 / 240

Using the Operation Panel 4-105
Adjust/Maint. (Adjust/Maintenance selection/
setting)
Adjust/Maintenance is used to adjust the print quality and to carry out
printer maintenance.
The options available in Adjust/Maintenance are as follows:
• ColorCalib.Cycle (Automatic color adjustment cycle setting)
• ColorCalibration
• Color Regist. (Color registration [Standard])
• Color Regist. (Color registration [Detailed])
• Restart (Restart Printer)
• Service Setting (for Maintenance)
IMPORTANT
Service Setting
is primarily a menu used by service
personnel for maintenance work. There is no need for customers to
use this menu.
1
Press [MENU] .
2
Press U or V to select
Adjust/Maint.
.
3
Press [OK] . The
Adjust/Maint.
menu appears showing a list of
available options.
ColorCalib.Cycle (Automatic color adjustment cycle
setting)
The cycle for automatic execution of color calibration can be selected.
The following cycles can be set:
1
In the Adjust/Maint. menu screen, press U or V to select
ColorCalib.Cycle .
2
Press [OK] . The
ColorCalib.Cycle
screen appears.
3
Press
U
or
V
to select the color adjustment cycle.
Adjust/Maint.: a b
1
ColorCalib.Cycle
2
ColorCalibration
3
Color Regist.
[ Exit ]
Auto Automatic judging and adjustment.
Short Gives priority to image quality. The color adjustment cycle
is shorter than Standard.
Standard Gives equal priority to image quality and printing
processing.
Long Gives priority to printing processing. The color adjustment
cycle is longer than Standard.
ColorCalib.Cycle:
a b
1 *Auto
2 Short
3 Standard
[ Exit ]