Kurzweil PC3K6, Musician'S Manual

Page: 233 / 381

MIDI Mode
The TRANSMIT Page
10-1
Chapter 10
MIDI Mode
The PC3K sends and receives MIDI on traditional 5 ‐ pin DIN connectors and through USB. MIDI
can be sent and received on all ports at once.
Press the MIDI mode button to enter MIDI mode. There are three pages in MIDI mode:
• TRANSMIT ( XMIT soft button)
• RECEIVE ( RECV soft button)
• CHANNELS ( CHANLS soft button)
You’ll use these pages to determine what MIDI messages the PC3K transmits, and how it
responds to the MIDI messages it receives—as well as how each MIDI channel behaves.
When you enter MIDI mode, you’ll see one of the three available MIDI mode pages.
The TRANSMIT Page
Press the XMIT soft button, and the TRANSMIT page appears. Use the parameters on this page
to control how the PC3K sends MIDI information to its USB or MIDI Out port. These settings to
some extent affect the PC3K’s response to its own keyboard and controllers, but they primarily
affect the responses of other MIDI devices that are receiving MIDI from the PC3K on the channel
specified with the Channel parameter on this page.
When a program is selected, either in Program mode or in Quick Access mode, all of the settings
of the TRANSMIT page are in effect, except for ChgSetups , which only applies when loading a
setup .
If a setup is selected, in Setup mode or in Quick Access mode, all of the settings of the
TRANSMIT page are in effect except for ControlSetup , Channel , and ProgChang (see below for
details . )
When sending MIDI to the USB or MIDI out port from Song mode, Song mode ignores all of the
settings on the Transmit page except ControlSetup (see below for details . )