Initial operation
7
Adjusting universal shaft (for the version with “PreChop”)
7.5
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en
73
7.5
Adjusting universal shaft (for the version with “PreChop”)
It must be possible to push together the both universal shaft halves in the narrowest position
(cornering with maximum steering angle and simultaneously driving a slope up or down) without
any contact of the both section tube ends. In this process, the displacement path (overlap) must
be at least 220 mm, both in straight-ahead driving and when cornering.
2
1
BP000-391
Pull apart the universal shaft halves (1, 2).
Removing the protective cap
2
1
3
BP000-392
In order to remove the protective cap (1) from the universal shaft half (2), push in the both
locks (3) using a screwdriver and push back the protective cap (1).
Put aside the protective cap (1) for later reinstallation.
