Machine description
4
Description of pick-up functions
4.8
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en
49
Needle yoke
BPG000-015
The connecting rod (1) of the needle yoke is secured by a shear bolt (2) (left-hand side of the
machine).
The shear bolt protects the knotter needle and the needle yokes against load peaks.
4.8
Description of pick-up functions
BPG000-016
The pick-up (1) is used to pick up the crops.
The pick-up (1) starts to rotate when turning on the PTO shaft.
The pick-up (1) is raised and lowered via the single-acting control unit (
) on the tractor,
.
The pick-up (1) is equipped with guide wheels (2). The working height of the pick-up (1) is set
via the guide wheels (2),
.
The bearing pressure of the guide wheels (2) can be adjusted to the ground conditions via the
spring (3),
NOTICE
Damages to the guide wheels and increased wear at the pivot point of the pick-up if the
lowering of the pick-up is not limited
If the lowering of the pick-up is not limited by means of the depth limiters (4), the guide wheels
may be damaged or there will be an increased wear at the pivot point of the pick-up when
passing deep furrows.
Limit the lowering of the pick-up by means of the depth limiters (4),
