Malfunction, cause and remedy
23
Malfunctions electrics/electronics
23.1
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en
319
Possible cause
Remedy
FMI 0: The upper limit value was greatly exceeded.
On the upper twine, the max-
imum twine length has been
exceeded when trying to tie a
knot.
Check the knotter and the knotter triggering.
Have the sensor adjusted.
522041-
1
Upper twine 1
Possible cause
Remedy
FMI 1: The lower limit value was far below the required one.
On the upper twine, the min-
imum twine length has not
been reached during packer
feed.
Have the sensor adjusted.
522042-
2
Upper twine 2
Possible cause
Remedy
FMI 1: The lower limit value was far below the required one.
On the upper twine, the min-
imum twine length has not
been reached during packer
feed.
Have the sensor adjusted.
522043-
3
Upper twine 3
Possible cause
Remedy
FMI 1: The lower limit value was far below the required one.
On the upper twine, the min-
imum twine length has not
been reached during packer
feed.
Have the sensor adjusted.
522044-
4
Upper twine 4
Possible cause
Remedy
FMI 1: The lower limit value was far below the required one.
On the upper twine, the min-
imum twine length has not
been reached during packer
feed.
Have the sensor adjusted.
522045-
5
Upper twine 5
Possible cause
Remedy
FMI 1: The lower limit value was far below the required one.
On the upper twine, the min-
imum twine length has not
been reached during packer
feed.
Have the sensor adjusted.
