Operation
9
Connecting twine rolls with each other (double knotter)
9.8
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en
107
Connecting upper twines (1)
BPG000-026
Make sure that the upper twines never cross over each other.
Connecting twine roll 1a with twine roll 1b
Guide the start of the twine from twine roll (1a) via the upper eye through the twine brake out
of the twine box.
Tie the start of the twine from twine roll (1b) in a reef knot to the end of the twine from twine
roll (1a).
Shorten the ends of all reef knots to
x = 15 - 20
mm.
Connecting twine roll 2a with twine roll 2b
Guide the start of the twine from twine roll (2a) via the upper eye through the twine brake out
of the twine box.
Tie the start of the twine from twine roll (2b) in a reef knot to the end of the twine from twine
roll (2a).
Shorten the ends of all reef knots to
x = 15 - 20
mm.
Connecting twine roll 3a with twine roll 3b
Guide the start of the twine from twine roll (3a) via the upper eye through the twine brake out
of the twine box.
Tie the start of the twine from twine roll (3b) in a reef knot to the end of the twine from twine
roll (3a).
Shorten the ends of all reef knots to
x = 15 - 20
mm.
