Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Page: 73 / 270

Surgery Start Up
Z370584 Rev. D Selecting and Changing Mode Parameters
4-19
Selecting and Changing Mode Parameters
The design of the system's graphical user interface (GUI) and touchscreen is for ease-of-use,
and provides a consistent look and maximum informational display during all operating
modes.
Your interface with the system requires only three basic steps, which apply to all the
selections, settings and operations. Once you understand this basic organization, you can
move quickly and easily through all the system functions and system operations.
Panels organize the text on the display screen. The top panel shows current status, EPT or
EFX timer, configuration options, the bottle height, and the foot pedal icon. The left-side
column lists the operating modes and submodes. The main panel that dominates the screen
shows current operating levels for aspiration, vacuum and power.
Figure 4-19 — Phaco Mode Screen
• To switch operating modes or submodes, select a button in the left panel. The control
panels in the main panel show the operating levels for that mode.
• To make basic changes to the settings, tap the + / - buttons to increase or decrease a value.