Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Page: 185 / 270

Z370584 Rev. D
8-1
8 — Symbol Definitions
The following symbols appear on the VERITAS
™
Vision System front and back panels and in
the software:
Symbol Definition
Symbol on the power switch indicates power is on.
Symbol on the power switch indicates power is off.
Symbol on the Power On/Off button. If the system is in power down mode,
pressing this button will cause the system to power up. If the system is powered,
pressing this button for a short duration will cause the system to display a
shutdown confirmation screen on touchscreen monitor. If the button is pressed
for a long time, the system will enter power-down mode without any on-screen
prompt.
Brazilian National Institute of Metrology, Standardization and Industrial Quality
(INMETRO)
Product Certification Body (OCP) - TÜV Rheinland do Brasil Ltda.
Indicates fuse.
Single phase alternating current.
Indicates isolation of the patient applied part from earth ground.