Johnson & Johnson Surgical Vision Veritas Operator'S Manual Download Page 64

Page: 64 / 270

Startup

Z370584 Rev. D

4-10

Surgery Start Up

Vitrectomy Cutter Setup

If you need to use vitrectomy during surgery:

Attach the vitrectomy cutter as shown below. Vitrectomy requires the following
components:



I/A Tubing (from tubing pack)



Vitrectomy cutter



Vitrectomy irrigation sleeve, or a 23 Gauge Limbal Infusion tip, if desired.

2. Use the instructions provided with the vitrectomy cutter to assemble the handpiece.

Figure 4-12 — Vitrectomy Cutter

3. Attach the connector to the vitrectomy receptacle on the front panel.

Startup

After you have turned on the system, the system performs a series of self tests.

After start up, the Surgeons and Programs screen displays the available surgeons and
programs.

CAUTION!

Perform functional checks of the system before first use of the day.

Summary of Contents for Veritas















































































































































































































































































Search results

Summary of Contents for Veritas

Reviews:

Related manuals for Veritas

Brands by name

Popular brands

Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Search results

Summary of Contents for Veritas

Reviews:

Related manuals for Veritas

Brands by name

Popular brands