Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Page: 250 / 270

Vitrectomy Specifications Z370584 Rev. D
12-20
Specifications
Vitrectomy Specifications
Table 12.17 – Vitrectomy Specifications
Diathermy Specifications
Table 12.18 – Diathermy Specifications
Peristaltic Pump Vacuum Level 0–650 mmHg in 5 mmHg increments
Pump Flow Rate 0-60 cc/minute, in 1 cc increments
Venturi Pump Vacuum Level 0-600 mmHg in 5 mmHg increments
Atmospheric
Pressure/Altitude Density Altitude (DA) conditions are 2,500 cpm from sea level to 3,000 feet
(914.4 m) elevation and shall be de-rated by 100 cpm per 1,000 ft (304.8 m)
additional elevation up to a maximum of 10,000 ft (3,048 m) above sea level.
Indicated Cut Rate Actual Cut Rate
Upper Limit (cpm) Actual Cut Rate Lower Limit (cpm)
2500 3000 2000
Power Adjustment 5% to 100%, in 5% increments
Diathermy Power (maximum power into rated load) 8.5 Watts into 350 Ohms 386 kHz
Maximum Output Current 0.17 Amps
Diathermy Type Bipolar
Rated Peak Voltage 160 Volts
Power Cord Length 12 ft (3.6 m)
Connector of diathermy forcep/probe Ø.072 RECEPTACLE (2)
All measurements are in inches.