Johnson & Johnson Surgical Vision Veritas Operator'S Manual Download Page 182

Page: 182 / 270

Restore All

Z370584 Rev. D

7-24

System Configuration

Figure 7-26 — Database Restore Screen

2. Select the database to restore from the list.

NOTE: This options allows you to upgrade a database saved on the USB device with the

Backup All feature on the WHITESTAR SIGNATURE PRO System. The database file(s)
appears in the list with “(WS PRO)” at the end of the name.

3. Tap

Restore Selection

4. Tap

at the confirmation screen.

Figure 7-27 — Database Restore Confirmation Dialog Box

5. Tap

Finished

to close the screen.

6. Tap

Exit

to close the Configuration screen.

Summary of Contents for Veritas















































































































































































































































































Search results

Summary of Contents for Veritas

Reviews:

Related manuals for Veritas

Brands by name

Popular brands

Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Search results

Summary of Contents for Veritas

Reviews:

Related manuals for Veritas

Brands by name

Popular brands