Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Page: 174 / 270

Set Units of Measure for Vacuum Z370584 Rev. D
7-16
System Configuration

Tap 12 Hour to display the time of day in 12-hour format; for example, 2:45:43 PM
would be displayed as 2:45:43 PM.
6. Tap Enter to return to the Configuration screen.
7. Tap Exit to close the Configuration screen.
Set Units of Measure for Vacuum
Follow these steps to set the units of measure for vacuum.
1. Tap Configuration .
2. Tap Set Vacuum Units .
Figure 7-14 — Set Vacuum Units Dialog Box
3. On the Set Vacuum Units dialog box, the current selection is highlighted in green. Tap the
button for the units of measure you want to use for the display of vacuum settings.
4. Tap Finished to return to the Configuration screen.
5. Tap Exit to close the Configuration screen.