Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Page: 66 / 270

Install the Tubing Pack Z370584 Rev. D
4-12
Surgery Start Up
Install the Tubing Pack
1. After you select a surgeon, you must select a program from the surgeon's available
programs.
NOTE: The program at the top of the list is the default program for that surgeon.
2. Tap the Prime/Tun e button.
NOTE: If a tubing pack is needed, the Install Pack Screen is shown.
Figure 4-14 — Install Pack Screen
3. Install a tubing pack as shown on the screen in Figure 4-14 by inserting it into the fluidics
panel until the system activates the latch mechanism to retain it.
4. For VERITAS Advanced Infusion Tubing Pack (VRT-AI) only: The infusion line has a black
infusion connector at the free end. Insert the infusion connector into the side panel of the
VERITAS Vision System and then turn it clockwise until it clicks when fully connected as
shown in
Figure 4-15 .