Johnson & Johnson Surgical Vision Veritas, Operator'S Manual

Page: 235 / 270

Specifications
Z370584 Rev. D Electromagnetic Compatibility
12-5
NOTE: The VERITAS Vision System has been designed and tested to comply with IEC 60601-
1-2 Ed. 4.0: 2014 requirements for EMC with other devices.
NOTE: The VERITAS Vision System EMISSIONS characteristics make it suitable for use in
industrial areas and hospitals (CISPR 11 class A). If it is used in a residential
environment (for which CISPR 11 class B is normally required) this equipment might
not offer adequate protection to radio-frequency communication services. The user
might need to take mitigation measures, such as relocating or re-orienting the
equipment.
Table 12.5 – Electromagnetic Emissions
Guidance and manufacturer's declaration - electromagnetic emissions
The VERITAS Vision System is intended for use in the electromagnetic environment specified below.
The customer or the user of the VERITAS Vision System should assure that it is used in such an environment.
Emissions Test Compliance
RF emissions
CISPR 11 Group 1 The VERITAS Vision System uses RF energy
only for its internal function. Therefore, its RF
emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11 Class A
Harmonic emissions
IEC 61000-3-2 Class A
Voltage Fluctuations/
Flicker emissions IEC 61000-3-3 Complies
The VERITAS Vision System is suitable for use in all establishments other than domestic and those directly
connected to the public low-voltage power supply network that supplies buildings used for domestic
purposes.