Z370584 Rev. D
2-1
2 — Warnings, Cautions, and Other Residual Risks
•
•
•
•
“Regulatory Symbol Definitions” on page 2-8
•
“Regulatory Compliance Statements” on page 2-10
•
“System Disposal” on page 2-11
•
“Toxic and Hazardous Substances” on page 2-11
•
“Packaging Information” on page 2-13
•
“Serious Incident Reporting” on page 2-13
•
“Instructions for Minimizing the Environmental Impact During Normal Use” on page 2-13
Cautions
Once you have set the system up and you have verified that all the functions are operating
properly, you are almost ready to use your system.
Read the following safety cautions carefully before using the system in surgery.
•
Do not use extension cords with your system.
•
Do not overload your electrical receptacle (outlet).
•
The instrument has ventilation openings at the rear of the console to allow ambient air
intake and the release of heat generated during operation. Do not block the openings; as
heat build-up can cause system failures which can result in a fire hazard.
•
Do not try to move the system cart on deep pile carpets or over objects on the floor, such
as cables and power cords.
•
Take care not to trip over power and foot pedal cords.
•
Do not try to lift the system console.
•
Do not place the instrument on uneven or sloped surfaces.
•
Only use disposables, accessories, or other surgical instruments designed for this system.
For optimum performance of the system and safety, use only parts recommended by
JJSV.
Summary of Contents for Veritas
